Wednesday, October 30, 2013

PHYSICS - PRESSURE

PRESSURE QUIZ


Pressure is Force per Unit Area



Pressure is the force on an object that is spread over a surface area
The equation for pressure is the force divided by the area where the force is applied
  • Although this measurement is straightforward when a solid is pushing on a solid
  • the case of a solid pushing on a liquid or gas requires that the fluid be confined in a container. The force can also be created by the weight of an object.
Questions you may have:

  • What is the pressure when a solid pushes on another solid?
  • What happens when a solid pushes on a confined fluid?
  • What happens when the force comes from gravity?

Pressure of solid on a solid

When you apply a force to a solid object, the pressure is defined as the force applied divided by the area of application. The equation for pressure is:

P = F/A
where

  • P is the pressure
  • F is the applied force
  • A is the surface area where the force is applied
  • F/A is F divided by A
For example, if you push on an object with your hand with a force of 20 pounds, and the area of your hand is 10 square inches, then the pressure you are exerting is 
20 / 10 = 2 pounds per square inch.


Pressure equals Force divided by Area

Pressure equals Force divided by Area

  • You can see that for a given force, if the surface area is smaller, the pressure will be greater. 
  • If you use a larger area, you are spreading out the force, and the pressure (or force per unit area) becomes smaller.

Solid pressing on confined fluid

When a liquid or gas is confined in a container or cylinder, you can create a pressure by applying a force with a solid piston. The pressure created in the cylinder equals the force applied divided by the area of the piston: P = F/A.
In a confined fluid—neglecting the effect of gravity on the fluid—the pressure is the same throughout the container, pressing equally on all the walls. In the case of a bicycle pump, the pressure created inside the pump will be transmitted through the hose into the bicycle tire. But the air is still all confined.

Pressure is in all directions in a fluid

Pressure is in all directions in a fluid
Increasing the force will increase the pressure inside the cylinder.

Caused by gravity

Since the weight of an object is a force caused by gravity, we can substitute weight in the pressure equation. Thus the pressure (P) caused by the weight (W) of an object is that weight divided by the area (A) where the weight is applied.

P = W/A
If you place a solid object on the floor, the pressure on the floor over the area of contact is the weight of the object divided by the area on the floor.

Pressure equals Weight divided by Area

Pressure equals Weight divided by Area

Example with shoes

A good example of how a force on small area can result in a very high pressure is seen in women's shoes with high spiked heels. These types of shoes can cause damage to some floors due to the very high pressure on the floor at the heel.
An average shoe distributes the weight of the person over 20 square inches. Thus, a 100-pound person applies 100/20 = 5 pounds per square inch on the floor.
Since a spike-heel is only 0.25 square inches, the 100-pound person would be applying 100/0.25 = 400 pounds per square inch on the floor at the heel! In some cases, that is sufficient to damage the floor.

Fluid weight

If you put a liquid in a container, the weight of that liquid would be pressing on the bottom of the container similar to that of the weight of a solid object. The pressure on the bottom of the container would be the same as if the weight was from a solid:

P = W/A.
The only difference is that pressure in a fluid goes in all directions. So the pressure on the sides at the bottom would be the same.
Gases and liquids exhibit pressure due to their weight at every point in the fluid.

Summary

Pressure is the force on an object that is spread over a surface area. The equation for pressure is P = F/A. Pressure can be measured for a solid is pushing on a solid, but the case of a solid pushing on a liquid or gas requires that the fluid be confined in a container. The force can also be created by the weight of an object.



Put pressure on yourself to excel

Take the Quiz:   SUPERHERO SCIENCE


by Ron Kurtus (revised 18 March 2006)

PHYSICS - VELOCITY,SPEED, & MOTION

Velocity, Speed, and Motion... Oh My!

Velocity equals distance divided by time. Velocity and speed are very similar ideas, but velocity is a vector, and speed is not. Suppose we knew that someone was driving at thirty-five kilometers an hour (35 km/hr), but the direction wasn't given. How would you draw an arrow to represent a vector? You can't know how to draw the vector if you only have one value (either amount or direction). In this example, you were never told about the direction. Physicists would say that the speed is thirty-five kilometers an hour (35 km/hr), but the velocity is unknown. On the other hand, if you're moving at 35 km/hr in a northern direction, then you would have an arrow pointing north with a length of 35. Physicists would say that the velocity is 35 km/hr north.

Velocity is the rate of motion in a specific direction. I'm going that-a-way at 30 kilometers per hour. My velocity is 30 kilometers per hour that-a-way. Average speed is described as a measure of distance divided by time. Velocity can be constant, or it can change (acceleration). Speed with a direction is velocity.

Remember vectors? You will use a lot of vectors when you work with velocity. Our real world example of navigation on the ocean used velocity for every vector. Velocity is a vector measurement because it has an amount and a direction. Speed is only an amount (a scalar). Speed doesn't tell the whole story to a physicist. Think of it another way. If I tell you I'm driving north and ask you how long until we get to the city. You can't know the answer since you don't know my speed. You need both values.

One Moment in Time

Instantaneous velocity measures one moment in time. There is a special thing called instantaneous velocity. That's the velocity at a split second in time. Above, we were talking about your speed and direction over a long period of time. Why would you need to measure a velocity at one moment? Think about the moment you drove over the manhole. It's important to know if you were going 1 km/hr when you drove over the manhole, or 60 km/hr. It wouldn't help you to know that your average speed was 30 km/hr.

The term "instantaneous" refers to something physicists call a limit. Scientists "limit" the amount of time they do the measurement. When the "limit" moves to zero, that limit is one tiny moment in time. A physicist would measure your velocity as the "limit for a period of time", zero, to get the instantaneous velocity.

Changing Your Velocity

Acceleration and decceleration When velocity is changing, the word acceleration is used. Acceleration is also a vector. You speed up if the acceleration and velocity point in the same direction. You slow down (also referred to as decelerating) if the acceleration and velocity point in opposite directions. When you accelerate or decelerate, you change your velocity by a specific amount over a specific amount of time.

Just as with velocity, there is something called instantaneous acceleration. Instantaneous means scientists measure your acceleration for a specific moment of time. That way they can say he was accelerating at exactly this amount at this point during his trip.

Constant Acceleration

Constant acceleration due to gravity There are a few special situations where acceleration may be constant. This type of acceleration happens when there is a constant net force applied. The best example is gravity. Gravity's pull on objects is a constant here on Earth and it always pulls toward the center of the planet (Note: Gravity decreases as you move far away from the surface of the planet.). The gravities of other planets are different from Earth's gravity because they may have different masses and/or sizes. Even though the gravity may be smaller or larger, it will still create a constant acceleration near the surface of each planet.